Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

Temporal and Spatial Variations of Phytoplankton Community Structure in Lake Erhai,a Chinese Plateau Lake,with Reference to Environmental Factors

Russian Journal of Ecology - Temporal and spatial variations of phytoplankton community in Lake Erhai were investigated from May 2010 to April 2011. A total of 124 species belonging to 8 phyla and...     

Designing a policy package for the promotion of servicising: A case study of vineyard crop protection in Galicia (Spain)

The servicising approach in vineyard protection is considered a valid alternative to achieve decoupling between the economic and environmental performance of viticulture. In this paper, a policy package is designed to promote the uptake of a servicised model of vineyard protection in an area of smallholding viticulture. In doing so, a specific methodology based on a step by step protocol has been followed that aims to come up with a package that is effective, implementable and socially as well as politically acceptable. The paper concludes on the importance of combining several policy instruments in a policy package to realise the political objective. The proposed viable policy package includes incentives that support the companies’ shift towards offering crop protection solutions, further development of IPM solutions and instruments that encourage farmers to reduce the use of pesticides and collectively hire crop protection services.     

Assessing relative vulnerability to sea-level rise in the western part of the Mekong River Delta in Vietnam

The Mekong River Delta in Vietnam plays a crucial role for the region in terms of food security and socioeconomic development; however, it is one of the most low-lying and densely populated areas in the world. It is vulnerable to seawater incursion, flood risk, and shoreline change, exacerbated as a consequence of sea-level rise (SLR) related to climate change. This study examined the Kien Giang coast in the western part of the delta, comprising seven coastal districts (namely Ha Tien, Kien Luong, Hon Dat, Rach Gia, Chau Thanh, An Bien, and An Minh), the economy of which is important in terms of agriculture and aquaculture. The analytical hierarchical process (AHP) method of multi-criteria decision making was integrated directly into geographic information systems (GIS) to derive a composite vulnerability index that indicated areas most likely to be vulnerable to SLR. The hierarchical structure comprised three key components: exposure (E), sensitivity (S), and adaptive capacity (A), at level 1. At the next level, 8 sub-components were mapped: seawater incursion, flood risk, shoreline change, population characteristics, land use/land cover, and socioeconomic, infrastructure, and technological capability, beyond which a further 22 variables (level 3) and 24 sub-variables (level 4) related to vulnerability were also mapped. Variables were assigned weights for incorporation into AHP pairwise comparisons after discussion with stakeholders. Maps were generated to visualise areas where the relative vulnerability was very low, low, moderate, high, and very high. Societal data were generally only available at district level; however, several regional patterns emerged. Relatively high exposure to flooding and inundation, salinity, and moderate loss of mangroves occurred along the coastal fringe of each district. This western section of the delta, which is low-lying and remote from the distributaries that carry sediment to the coast, appears to be particularly vulnerable. The most sensitive areas tended to be ethnic households engaged in rice cultivation and with moderate population density. The least adaptable areas consisted of high numbers of poor households, with low income, and moderate densities of transport, irrigation and drainage systems. Most coastal districts were determined to be moderately to relatively highly vulnerable, with scattered hotspots along the coast.     

Analysis of metabolic changes in Trichoderma asperellum TJ01 at different fermentation time-points by LC-QQQ-MS

Trichoderma spp. are among the most widely recognized biocontrol fungi used to inhibit pathogens and promote plant growth. These functions are related to primary and secondary metabolites. This study investigated the different metabolites in Trichoderma asperellum TJ01 cultured for 24 and 72?h using liquid chromatography with triple-quadrupole mass spectrometry. Compared to the 24?h culture of T. asperellum TJ01, the 72?h culture with amino acid metabolism tended to decrease while sugar and lipid metabolisms tended to increase. Furthermore, the 72?h culture had a higher proportion of upregulated flavonoids, in combination with a higher proportion of downregulated alkaloids, and equal proportions of upregulated and downregulated polyphenols and hormones. This study also identified a few valuable medicinal substances such as trigonelline and 5-hydroxytryptophan in T. asperellum TJ01 fermentation cultures.     

Sand as a relevant fraction in geochemical studies in intertidal environments

Soil and sediment samples from several intertidal environment exposed to different types of contamination were studied to investigate the importance of grain size in relation to the capacity of the substrates to retain trace metals. The unfractionated samples (referred to as bulk samples) were separated into the following grain/size fractions: fine–coarse sand (2?0.100 mm), very fine sand (0.100?0.050 mm), silt (0.050?0.002 mm), and clay (0.002 mm). The sample into its fractions was carried out was in a glove box under high-purity N₂ atmosphere in order to minimize any alterations to the samples. The bulk samples were characterized in terms of physicochemical properties such as pH, redox potential, and grain size. The total organic carbon (TOC), total sulfur (S), iron (Fe) pyrite, Fe, and manganese (Mn), and trace metals lead (Pb), mercury (Hg), chromium (Cr), and nickel (Ni) were analyzed in the bulk samples and in each fraction. The sand fractions were also examined by scanning electron microscopy (SEM). Comparisons of the above parameters were made between fractions and between each fraction and the corresponding bulk sample. The fine–coarse sand fraction contained high levels of the primary elements of the geochemical processes that occur in marine sedimentary environments such as TOC, total Fe, Mn, and S. The net concentrations of these four elements were higher in the fine-coarse sand fraction than in the very fine sand fraction and were similar to the net concentrations in the silt and clay fractions. Detailed SEM analysis of the sand coarse fraction revealed the presence of Fe and aluminum oxyhydroxide coatings in the oxic layers, whereas the framboidal pyrites and coatings observed in the anoxic layers were Fe sulfides. The presence of the various coatings explains why the trace metal concentrations in the sand fine–coarse fraction were similar to those in the clay fraction and higher than those in the very fine sand fraction. The present results highlight the importance of the sand fraction, which is generally disregarded in geochemical and environmental studies of sedimentary layers.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Arsenic biotransformation and an arsenite S-adenosylmethionine methyltransferase in plankton

<正>Arsenic(As)is a well-recognized toxicant and carcinogen.Chronic exposure to inorganic arsenic causes a range of human cancers(e.g.,skin,bladder,and lung)and increases the risk of developing diabetes,hypertension,and cardiovascular and neurological diseases.The prevalence of arsenic species and the severity of their health effects continue to drive and demand for extensive research(Carlin et al.,2016).     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.